Brand Name: Syma
Item Name: Explorers 6 Axis 4CH RC Quadcopter Mode 2 New Version
Item NO.: X5C-1
Channel: 4CH with 6 Axis Gyro
Camera Pixel: 2 million
Video Time: About 30mins (allow video and camera at the same time)
Photos: About 800 pictures
Memory Card: 2G
Main Rotor Diameter: 14cm
Battery for Controller: 4"AA" batteries(not included)
Battery for Quadcopter :3.7V 500mAh Li-poly
Charging Time: About 90 mins(USB charging)
Flying time: About 7 minutes
Controlling Distance: About 50 meters
With 2 million pixels Camera
The 6-axis system allows the quad to be hand launched.
6-Axis gyro quad-rotorcraft flight, strong stability,can easily implement various flight movements, stronger wind resistance, easier to control.
2.4 technology adopted for anti-interference.even more than one quadcopter is flying at the same time they will not interfere with each other.
The quadcopter can fly both indoor and outdoor.Including 4CH digital proportional RC system.
Rechargeable high performance battery.
Function:up/down,left/right sideward fight,forward/backward,turn left/right,with gyro/flash lights,A 360-degree 3D and special functions(continuous rolling)
1 x SYMA X5C Quadcopter
1 x Transmitter
1 x 500mah Battery
3 x 750mah Battery
8 x Blades
1 x SD Card
1 x USB Charger
1 x CW Motor
1 x CCW Motor
|Minimum Age Recommendation: 14 years
Experience Level: Beginners ~ Expert
Recommended Environment: Outdoor
Assembly Time: Less than half hour
Is Assembly Required: Yes
|Motor: 3715 powerful out runner brushless motor
ESC:Easy-Plug 40A Switch-mode BEC brushless ESC
Servo: 9-gram Servo * 6pcs
Propeller: 1060 Propeller
|2.4Ghz 6-Channels(Not Included)
Receiver Not Included
|11.1V/14.8V 1800mAh ~ 10000mAh Li-Po (Not Included)|
|Wingspan: 1980mm (77.9 in)
Overall Length: 1170mm (46 in)
Flying Weight(without battery): 1500g
- Add plastic hinge on the vertical and horizontal tails,increase the rudder angle.
- Big space, durable UNIBODY design
- Special airfoil design for carrying big weight
- Compatible with most kind of camera mounting
- Capability to carry Camera Gimbal
- Quick, easy to assembly, no glow required
- Light weight and durable EPO wing construction
FPV SYSTEM DEPLOYMENT
Special design and optimize for long range FPV, so there is a lot of space for mounting systems and different Camera mounting way, which not require any modify.
EASY FOR ALL KIND OF CAMERA MOUNTING
Are you tired of modification a lot to mount your camera well? Now you don’t have to. We consider a lot kind of mounting for you, you can easy to mount it as better as you like. Stable, safe, and easy, just focus to make a wonderful video and enjoy it.
EASY FOR FPV CAMERA MOUNTING
Considering for professional FPV traveling, usually you will need a full HD camera and another FPV camera for Video transmission, so we leave a very convenient, safe, good view space for you to mount a FPV camera, just enjoy it.
SPECIAL FUSELAGE DESIGN
The whole unibody fuselage is produced by our copyright one-step moulding technology, which make it more durable and strong than other EPO foamy insert carbon tube. So it can avoid the tail effected by the air and cause the bump during the flight.
Special small platform in the tail is builded for video TX installation, can leave away from the radio equipment avoid causing nosy. In the same time the propeller can cool down it from over heat.
We are thinking much more than others, for UAV system setup, to calibrate the sensors in horizontal level is very very importance. So the gradienter in the wing CG position will help a lot to setup the system.
VERY BIG SPACE FOR BIG BATTERIES
The very importance point for a airplane which can travel long range or not, should be the big batteries carrying ability. Thanks to our unibody technology, we have much more a lot space than other foamy plane to carry almost twice capacity batteries. Of course we still have a lot more space for equipment, and sure we have lot more space for cooling down the battery.
As image showing the fuselage carrying 2pcs 14.8V 5000mAh Li-Po batteries.
1 x Volantex Ranger EX 757-3 RC Airplane PNP
Brand name: JJRC
Item name: H18 Hexrcopter
Function: Forward/backward,left/right,up/down,left and right side fly,headless mode,roll
Gyro: 6 Axis
Battery: 3.7V 75mAh
Battery for transmitter: 2*1.5V AAA batteries(not included)
Flight time: 5-6mins
Charging time: 45mins
Control distance: 20m
1 x JJRC H18 2.4G 4CH 6 Axis Hexrcopter
1 x 2.4G transmitter
1 x 3.7V 75mAh battery
4 x Blades
1 x USB cable
1 x Manual